1-wire / MODBUS sensor for measuring temperature, relative humidity, CO2, VOC, ambient light, sound pressure and barometric pressure.

1-wire sensor for measuring temperature and relative humidity. There is also a pipe installation version of this sensor.

Wireless (NB-IoT) sensor for measuring temperature, relative humidity, CO2, VOC, ambient light, sound pressure and barometric pressure.

Wireless (NB-IoT) sensor for measuring temperature, CO2, VOC, ambient light, sound pressure and barometric pressure.

Rechargeable battery powered wireless (NB-IoT) sensor for measuring temperature and relative humidity.

Wireless (NB-IoT) sensor for measuring temperature and relative humidity.

Compact and DIN mountable module for collecting data via 1-wire, RS232, RS485 and sending it over NB-IoT to the cloud.

Controller for situations where multiple inputs and outputs are needed. 12 digital inputs, 8 digital outputs and 4 relays. Communications: LTE, 1Wire, RS485, RS232, ETH.

Controller for situations where multiple inputs and outputs are needed. 12 digital inputs, 8 digital outputs and 4 relays. Communications: 1Wire, RS485, RS232, ETH.

Universal controller specifically designed for different integrations, where Ethernet, LTE, GPS, RS232, RS485 or 1-wire are needed.

Universal controller specifically designed for different integrations, where Ethernet, RS232, RS485 or 1-wire are needed.

Mifare card reader with USB interface, which supports MIFARE Mini, MIFARE 1K, MIFARE 4K, MIFARE Ultralight, MIFARE DESFire EV1 and MIFARE Plus card types.

USB to RS485 dongle

This module can be used to communicate with Wiegand card readers over long distances via RS485.

This module can be used to communicate with Wiegand card readers via RS232.

This module can be used to communicate with Wiegand card readers via USB.

8-port 1-wire interface DIN mountable module for independent  8-port 1-wire expansion, data can be transmitted via RS485 or USB.

DIN mountable module for I/O expansion over 1-wire interface. Module offers 4x isolated digital inputs and 4x relay outputs.

DIN mountable analog inputs (4-20mA, 0-10V, PT100/1000) are measured and data is sent over MODBUS or USB.

DIN mountable analog outputs (4-20mA and 0-10V) are controlled via MODBUS or USB.

Digital to MODBUS interface. High-side push-pull driver operates as digital input or digital output. Device is controlled via MODBUS.

DIN mountable module for expanding relay outputs via MODBUS or USB. Total current capability is 80A.

DIN mountable relay expander, which can be controlled over WiFi.

DIN mountable module for creating redundant power supply with two power intputs. Input with highest voltage is used for output.

Isolated DC/DC converter, options: 3,3V; 5V; 9V; 12V; 15V; 24V

Isolated DC/DC converter, options: 3,3V; 5V; 9V; 12V; 15V; 24V